Here is just an update of things that I have done last weeks. I've been working on my steering wheel,fuel tank, breaks and shocks.
The clearcoat of my steering wheel was worn out so that’s why I clear coated it again.
This
was the condition of the steering wheel when I bought it.
|
When sanding the steering wheel the black line came off and I had to re-spray the line. |
With the sticker cutter of my dad I cutted out a cirkel that I had measured and placed the sticker exactly in the middle of the steering wheel. |
Black paint. |
Steering wheel in the first clear coat. |
Second clear coat and got it in the sun to dry. |
Result! Then I started working on my fuel tank. |
Rubbers, fuel floater and all small parts removed from the tank. |
got the fuel tank cleaned from the outside and inside |
First layer rx5. |
After 6 ours second layer of rx5. |
After 24 ours the third layer 50% rx5 and 50% rx10. |
And the last layer 95% rx10. |
Got it in the sun to dry. I am happy with the result
only the coating stays fairly soft and can damage quickly. |
Found
an
old Toyota Landcruiser at my grandpa’s garage and the funny thing about it is that they got the brakes I was searching for! |
The calipers disassembled and after rebuild they will go on my Z. |
New rubbers |
Pistons removed and got them cleaned. Got the calipers sandblasted and repainted with heat-resistant paint |
Package from Techno Toy Tuning! |
Polyurethane rubbers for the shock absorbers. |
Front springs with steering bearings between. |
Even alles in elkaar gezet kijken of het allemaal paste. |
Got everything mounted to look if it fits. |
Got the backside mounted too. Really
like the T3 parts! |
High performance brakelines from Goodridge. |